It looks like you're new here. If you want to get involved, click one of these buttons!
This stone crusher plant adopts the electric motor as the power. The eccentric shaft is revolved by an electric motor through v-belts. It causes the swing jaw following the preconcerted path to crush the feeding material. Thus the material will be crushed in the crushing chamber which is composed of the stationary jaw plate, swing jaw plate and the liner plate. The material is discharged from the lower part of machine that is what you want.
The space between impact plate and plate hammer is convenient to adjust. The finished product is cubic-shaped.Impact stone crusher is small in size, occupying very little space. Designed with a hydraulic opening device, easy and convenient to operate, install and maintain. The new wear resistant materials enable the plate hammer, impact plate and lining plate to have a longer service life.
The impact stone crusher is used for crushing various rocks, constructing railway, expressway roadbed and dam area of power station, producing artificial dinas for the building industry, etc. The strip and strip pulley are driven by a motor, and the movable jaw moves up and down via eccentric shaft. The angle between fixed jaw and movable jaw becomes smaller when the movable jaw runs down, then the materials are crushed into pieces.It will become bigger when the movable jaw runs up. The movable jaw board leaves the fixed jaw board under the action of pole and spring , then the end products come out from the crushing cavity.