It looks like you're new here. If you want to get involved, click one of these buttons!
High-grade wood wax. Do not dilute, because its ingredients mainly from natural beeswax, 36 degrees Celsius (human body temperature) above the transparent, lower than the human body temperature was translucent solid. Need to use a sponge smear on the floor, to be dried (about 10 minutes) and then towel polishing. As the amount of savings, each bottle of anti-static floor wax can be used 100 square meters, need to re-use the cycle of 180 days, easy to polish, and form the wax of life wax protection and moisturizing effect is more economical and practical for home use product.
Remove the original wax layer with wax water and proper wax pad, rinse with clean water. When the ground is completely dry, use a clean wax to spread the product evenly on the floor, wait about 30 minutes until the wax layer is completely dried, then apply the second layer of wax, and apply three to five layers of wax as needed. Do not pour the remaining wax back into the original container.
Regular fill wax, available 1 water against 1 anti-static floor wax drag the ground. For routine maintenance, it is recommended that you use an antistatic floor cleaner to clean it, or use an antistatic counter detergent to clean it. Polishing, polishing with 1000 rpm above speed. Save above 0 ��."composite material supplier in malaysia,outdoor chair plans,highest quality composite decking"